StimLab™
StimLab™ Offers Effective Bedside Stimulator Oversight and Control
Physicians have been asking for a remote controller or at least a heads-up display for their cardiac stimulators for years … and now Micropace delivers.
The Micropace StimLab™ system offers the first effective bedside stimulator slave display and touch screen controller, displaying all stimulator settings and allowing adjustment of all basic stimulator parameters by the scrubbed physician.
The flexible bedside controller may be simply placed on a trolley or mounted on an optional roll stand and hot-connected and disconnected with a single heavy duty connector for stowage.
It may also be permanently mounted on an adjustable arm or on the X-ray display gantry via a standard VESA mount. Suitable sterile elasticised covers are available.
Description
System
| Stimulus Controller: | Embedded micro-controller in SGU |
| User Interface: | Computer Touch Graphical Interface |
| Power: | 110-240VAC 50-60Hz, 95VA max, (40VA standby), Class II |
| Isolation transformer: | 110-240 VAC, 100 VA, IEC60601-1 |
Cabinet
| PC: | Bona Lex Light System SBC, CPU VIA, Eden ESP™ 533 MHz or similar |
| Hard Disk: | >=64Mb Compact Flash Card |
| Power Source: | 100-240 VAC to 12V DC 5.0A PSU |
| O/S Software: | Custom RTOS / Datalight ROM-DOS |
| Remote Trunk Cable: | Length: 17m (55.7 feet), 10mm o.d. Connector: Single Cannon Trident series bayonet 23 pin cable reverse connector, max diam. 34.3mm |
| Local Screen Cable: | 1.25 meters (4 feet), integrated cable |
| Weight: | 7.3kg (11.0kg with all attached external cables) |
| Dimension: | 400 x 300 x 122 mm |
| Video Extension: | Gefen Extendit VGA Extender SR |
Remote Touch Screen
| Monitor type: | ELO Entuitive ET1529L, 15″ LCD |
| Touch technology: | AccuTouch Five-Wire Resistive |
| Power rating: | Input: DC 12V / 2A (max.) only. |
| Mounting: | Integral stand or VESA 75mm mount |
| Cable Length: | 4 meters (13 feet) |
| Dimension: | 354 x 301 x 285mm |
| Power Consumption: | On: 50W max, Sleep: 4W, Off: 2W |
| Sealing: | Resistant to splashes, IPX0 |
| Standard stand tilt: | 0° to 45° from vertical |
| Weight: | 16.2 lbs (7.4kg) |
Optional Remote Touch Screen Roll Stand
| Height: | 31″ (79cm) to 45.5″ (115.5cm) |
| Lift Mechanism: | Gas spring assisted |
| Counterweight: | Built-in 10 lbs (4.5kg) |
| Screen tilt range: | -20° to +30° from vertical |
| Weight: | 38lb (17.3kg) |
| Mount: | VESA 75mm Display mount |
Stimulus Generator Unit
| Main power source: | 100-240 VAC to 15 VDC 1.2 A PSU |
| Backup power: | 12V 2.1 Ah sealed lead acid |
| Emergency power: | 9V LiMnO2I PP3, 10y life |
| Weight: | 5.3 kg including batteries & PSU |
| Dimensions: | 31.5cm x 34.0 cm x 9.5cm |
| Power Consumption: | 800 mA (12W) peak during operation, 40 mA (0.6W) in standby mode |
| Operating time: | Indefinite with mains connected. Two(2) hours on backup battery |
Pacing Channels
| Isolated Channels(3): | (i) Atrial (ii) Ventricular via green Redel 4 pin socket (iii) Emergency Fixed Pace Output to Ventricle, via red Redel 4 pin socket |
| Power Source: | Internal DC-DC converters |
| Circuit Isolation: | Opto-coupled, 5kV, common & differential mode |
Computer Controlled Stimulus Pulses
| Current: | 0.1 to 25 mA |
| Current Steps: | 0.1 mA |
| Accuracy: | ± 2%, or ± 0.2mA which ever is greater |
| Pulse Duration: | 0.5 ms, 1 – 10 ms in steps of 1 ms |
| Accuracy: | ± 0.15 ms |
| Load Impedance: | 200-1000 W, < 700 W for max current |
| Max Output Voltage: | 27V |
Inter-stimulus Intervals
| S1 Range: | 180 – 9990 ms (Pace) 30 – 9990 ms (Burst Pace) |
| Stability: | Quartz computer clock, ± 30 parts per million @ 25°C |
| Extra-Stimuli: | 6 max, S2-S7, independent |
| Coupling interval: | 30 – 9990 ms |
| Accuracy: | ± 1 ms or 0.1% whichever is greater |
