StimLab™ Offers Effective Bedside Stimulator Oversight and Control

Physicians have been asking for a remote controller or at least a heads-up display for their cardiac stimulators for years … and now Micropace delivers.

The Micropace StimLab™ system offers the first effective bedside stimulator slave display and touch screen controller, displaying all stimulator settings and allowing adjustment of all basic stimulator parameters by the scrubbed physician.

The flexible bedside controller may be simply placed on a trolley or mounted on an optional roll stand and hot-connected and disconnected with a single heavy duty connector for stowage.

It may also be permanently mounted on an adjustable arm or on the X-ray display gantry via a standard VESA mount. Suitable sterile elasticised covers are available.


 Stimulus Controller:  Embedded micro-controller in SGU
User Interface:  Computer Touch Graphical Interface
Power: 110-240VAC 50-60Hz, 95VA max, (40VA standby), Class II
Isolation transformer: 110-240 VAC, 100 VA, IEC60601-1
PC: Bona Lex Light System SBC, CPU VIA, Eden ESP™ 533 MHz or similar
Hard Disk: >=64Mb Compact Flash Card
Power Source: 100-240 VAC to 12V DC 5.0A PSU
O/S Software: Custom RTOS / Datalight ROM-DOS
Remote Trunk Cable: Length: 17m (55.7 feet), 10mm o.d.
Connector: Single Cannon Trident series bayonet 23 pin cable reverse connector, max diam. 34.3mm
Local Screen Cable: 1.25 meters (4 feet), integrated cable
Weight: 7.3kg (11.0kg with all attached external cables)
Dimension: 400 x 300 x 122 mm
Video Extension: Gefen Extendit VGA Extender SR
Remote Touch Screen
Monitor type: ELO Entuitive ET1529L, 15″ LCD
Touch technology: AccuTouch Five-Wire Resistive
Power rating: Input: DC 12V / 2A (max.) only.
Mounting: Integral stand or VESA 75mm mount
Cable Length: 4 meters (13 feet)
Dimension: 354 x 301 x 285mm
Power Consumption: On: 50W max, Sleep: 4W, Off: 2W
Sealing: Resistant to splashes, IPX0
Standard stand tilt: 0° to 45° from vertical
Weight: 16.2 lbs (7.4kg)
Optional Remote Touch Screen Roll Stand
Height: 31″ (79cm) to 45.5″ (115.5cm)
Lift Mechanism: Gas spring assisted
Counterweight: Built-in 10 lbs (4.5kg)
Screen tilt range: -20° to +30° from vertical
Weight: 38lb (17.3kg)
Mount: VESA 75mm Display mount
Stimulus Generator Unit
Main power source: 100-240 VAC to 15 VDC 1.2 A PSU
Backup power: 12V 2.1 Ah sealed lead acid
Emergency power: 9V LiMnO2I PP3, 10y life
Weight: 5.3 kg including batteries & PSU
Dimensions: 31.5cm x 34.0 cm x 9.5cm
Power Consumption: 800 mA (12W) peak during operation, 40 mA (0.6W) in standby mode
Operating time: Indefinite with mains connected.
Two(2) hours on backup battery
Pacing Channels
Isolated Channels(3): (i) Atrial
(ii) Ventricular via green Redel 4 pin socket
(iii) Emergency Fixed Pace Output to Ventricle, via red Redel 4 pin socket
Power Source: Internal DC-DC converters
Circuit Isolation: Opto-coupled, 5kV, common & differential mode
Computer Controlled Stimulus Pulses
Current: 0.1 to 25 mA
Current Steps: 0.1 mA
Accuracy: ± 2%, or ± 0.2mA which ever is greater
Pulse Duration: 0.5 ms, 1 – 10 ms in steps of 1 ms
Accuracy: ± 0.15 ms
Load Impedance: 200-1000 W, < 700 W for max current
Max Output Voltage: 27V
Inter-stimulus Intervals
S1 Range: 180 – 9990 ms (Pace) 30 – 9990 ms (Burst Pace)
Stability: Quartz computer clock, ± 30 parts per million @ 25°C
Extra-Stimuli: 6 max, S2-S7, independent
Coupling interval: 30 – 9990 ms
Accuracy: ± 1 ms or 0.1% whichever is greater